192.168.0.1 Admin Login, Password, and Settings

Over the passing years, internet technology has affected our daily life at a huge level. Ever since the arrival of the internet our way of communication has changed entirely. With the help of the internet, our time usage has become much more efficient. If we wish to connect to anyone across the globe, all we have to do is plug in your internet and go to social media sites such as Facebook, Twitter, etc.

The Internet has become a huge library where different music, movies, research papers, and many more things are stored. But in order to access the internet there are some basic requirements that you need to meet that is you should have the entire setup including the router, wires, antennas, and etc. An IP address is one such basic requirement. Every device that is connected to a computer network has been assigned an Internet Protocol Address or IP Address that is unique for that device such that no two device has similar IP address. IP addresses gives each host a unique identity and can also be used to track a particular server’s location.

192.168.0.1

There is a default Admin Login Page with the Internet Protocol Address of 192.168.0.1. Many routers directly use this IP Address for connecting to the Official Admin Login Page. If you have TP link, Cisco, D link, Linksys, Netgear, Asus, Belkin And Billion Router, then at this Admin Login page you will be provided with a Username and Password. 192.168.0.1 is one of the most notable IP Address. In this article we will be discussing about this infamous IP Address, what is its use, and the steps for finding your router’s IP Address.

What is The Use of 192.168.0.1 IP Address?

When I was a beginner to all this stuff, I used to wonder what exactly is the use of an IP Address. Before knowing the use it is important to know that the IP address 192.168.0.1 is a private IP Address and at this Login page you will be provided with a Username and Password and that will be unique for all.

With our IP Address, we can make loads of changes to our Router’s basic settings and sometimes even to the advanced settings. We can change the WiFi settings from multicast to unicast. The authentication type, fragment threshold, Ethernet to wireless blocking, data rate, and many more settings on your device can be changed with the help of the IP Address.

How to Login 192.168.0.1 IP Address in Simple Steps

Like all the other pages, you have to log in to the 192.168.0.1 Admin Page as well. For doing so you can follow the lengthy yet simple process given below:

STEP 1: At first, on your desktop locate the Browser shortcut icon and click on it.

STEP 2: After that, at the top of your screen you will be able to locate the address bar.

STEP 3: Now, in the Address bar type the IP Address 192.168.0.1 or you can click on the “Access Router Panel” Option.

(NOTE: It is important for your device to be connected to the same router’s address)

STEP 4: After entering your IP Address you will be asked to enter a Username and Password. Here you have to enter the unique Username and Password provided to you. After typing your credentials press on the Enter key.

STEP 5: Note that if you have no idea about your default credentials you can type admin in both the Username and Password text box. You can reset your Username and Password credentials if this method does not work for you.

STEP 6: After verification of your user id and password you will be taken to the Settings or Dashboard page.

STEP 7: Here you will be able to access both basic and advanced settings.

NOTE: Do not play with these settings lightly as then you might not be able to change them on your own.

Simple Steps to Find Your Router’s IP Address

For routers and modems of different brands, the IP Address differs, but to your relief, you can easily find out your device’s IP Address. For doing so, follow the steps given below:

STEP 1: At first, On your keyboard press the Windows key + X key. This will open your Run prompt.

STEP 2: After that type the command “cmd” in the text dialog box and press on the Enter key.

STEP 3: This will open up your command window.

STEP 4: Now, in your command prompt enter the command “ipconfig/all” and press on the Enter key.

STEP 5: Afterwards, a lot of IP addresses will be visible on your screen and one of them will be your Gateway IP Address.

What To Do If You Forget The Username and Password?

We are human beings, not robot and we are prone to make mistakes. One of the most common and frequent mistakes we make is forgetting our username and password. This mistake can be justified as we have so many different user ids and passwords for different sites. In case you have forgotten your username or password all you have to do is go through the methods given below:

Method 1: Try to Reset Your Router to Its Default Settings

STEP 1: At first, Go to the back of your router.

STEP 2: Now, locate the reset button. Take an object having a pointy end and insert it into the reset button and hold for a few seconds.

STEP 3: At last, turn on your router again.

Method 2: Reset Your Router Settings

STEP 1: At first, go to your router’s web-based setup page.

STEP 2: Afterwards, Navigate to the Administration tab and click on it.

STEP 3: Beneath the Administration, tab selects the factory defaults option.

STEP 4: At last, select the Restore Factory Settings option.

Method 3: Change the Routers Password

STEP 1: At first, go to your routers web-based setup page

STEP 2: Afterwards, Navigate to the Administration tab and click on it.

STEP 3: Beneath the Administration, the tab selects the Management option.

STEP 4: Look for the Router password dialog box and type your new password.

STEP 5: Re-enter the password to confirm that you have entered the correct password.

STEP 6: Finally click on the Save button to apply the changes you have made.

How to Troubleshoot an Unresponsive Router?

It is completely normal for your router to hang or stop working from time to time. So, what should we do when this happens? It’s simple, we can use the troubleshooting method. Troubleshooting is basically searching and finding out the actual problem. For doing so, all you have to do is follow the steps given below:

Step 1: First of all verify if your router is connected through an Ethernet cable or it uses a Wifi connection.

Step 2: Next, make sure that the status of your Power Cord and the power supply is in a good condition.

Step 3: At last, check the LED lights on top of your router. Normally when you are receiving a proper connection all the LED lights will be lit up. If the DSL light is showing red color then that means that the fault is in your land-line or service provider.

Final Words

The Internet has become a very important part of our life. It has become a necessity and it is the need of the hour during times like covid pandemic. At present people of all ages are using the internet to get their daily work done. Some of these people are just beginners and don’t know the basics of working of the internet and what to do when they face connectivity errors. We hope that this article has enlightened you about the basics of IP Address and its use and how it works.

Leave a Reply