192.168.10.1 is a private IP address used for local area network connection. It is also a default IP address used by many router brands such as Motorola, Twisted pair link, TRENDnet, and many other such brands. In case you want to change settings such as username, password or you want to access to web interface without involving your technician then all you need is the default IP address of your router, modem, or your network device and follow the necessary login steps.
The Default Username And Password 192.168.lO.1
When you login in for the first time from your device you will need a default username and a password given by the service provider. You will find the username and the password at the back of your router’s or modem’s sticker. You will also find the same in the quick user manual that came with your network device.
The IP address may be same of many companies but the username and passwords vary from manufacturer to manufacturer. You will need the default login IP address, username and password for first time setup. The most common username and password which is used by many manufactures are as follows
Usernames– user or admin
Passwords– 1234, admin or password
You can try this usernames and passwords for your network device. Try them with various combinations of uppercase and lowercase letters. You can also try DZY-W2914NSV2 as a password for Wevo wireless router. For the accurate information about the username and password you should check the manual that came with router or the sticker on the back of router.
Steps To Login 192.168.10.1 With Admin
If you have any network device that has 192.168.10.1 login IP address and you wish to update its settings or access to its interface then you just need to follow these simple steps.
Step 1: Connect your router using the default Wi-Fi Service Set Identifier (SSD) the username and using the password with either wired or wireless connection.
Step 2: Connect the cable to your router or other network device. For a wired connection you should always use RJ45LAN cable for better durability and connectivity.
Step 3: Change Local Area Network or LAN IP address of your computer or Laptop to DHCP mode. You can also configure manually by using 192.168.10.1 in static mode.
Step 4: Turn on the power of the device using the adapter that came with it.
Step 5: After turning on the device, follow the necessary steps to access settings.
Open IP Address To The Web Browser
Step 1: Open a web browser from your laptop or computer.
Step 2: Search for 192.168.10.1 in URL search box. Make sure to write it absolutely correct.
Step 3: Wait for few seconds until the page loads. You will then be asked to login by providing the default username and password. Submit the details to authenticate.
Step 4: After successful authentication it will direct you to the device setting page from where you can manage settings easily.
Troubleshooting
Sometimes due to several reasons, you might not be able to access the login through the 192.168.10.1 IP address from the web browser. These can be fixed with easy and simple troubleshooting steps.
The most common mistake that many people do is not typing the correct IP address. This will lead to an error or the page does not load at all. To make sure you have searched for the correct IP address always copy and paste it. Also, if the error is still there after correcting the IP address it may be because your network device does not have a 192.168.10.1 IP address.
Sometimes the Ethernet cable used for connecting router to the device is not properly connected or it does not support that particular router or device. In such cases remove the cable and connect it again after few seconds. If the problem is still there you can try using another cable.
Another reason for not getting the access is maybe because of the router. Your router maybe is a faulty one or is too old to support the connection. Change the router to solve this problem. If there is any other problem that you cannot identify then you can contact to your service provider or technician.
Can’t Access IP 192.168.10.1 To Browser?
If the 192.168.10.1 IP address is not working for you or the web browser takes a long time to respond or you are just stuck on the loading page, it all maybe because of some blocking issues or network misconfiguration. To fix the login issue, you can follow these steps.
Step 1: Make sure that the address you have searched for is the same as the one at the sticker back of your router or the one that came with the user manual.
Step 2: Turn off the antivirus firewall which might be blocking access to a login IP address.
Step 3: To access the settings, make sure to connect the laptop or computer through LAN port, not WAN.
After following the above steps to resolve the issue, if you are still facing problems to log in you can use the reset button on the device to reset it and recover the default login details.
Factory Reset 192.168.10.1 IP Address
Every manufacturer of the network devices gives a reset button attached to the device that can be used in case you have lost access or something goes wrong. You can follow the steps that are mentioned below to factory reset your device.
Step 1: Track a small reset button that is present at the backside of your device, near the Ethernet port.
Step 2: Use a needle or some sharp pointed object that can hold the reset button for few seconds.
Step 3: Release the button when you see led blinking again that means router rebooting has started.
This process might take few minutes to restore to default settings. You can try the login steps again after the reboot is completed.
Conclusion
Make sure you have a backup configuration before using the factory reset button. You can very easily login 192.168.10.1 IP address through web browser by following the above steps. If you still face any trouble while login you can contact to your service provider.
