AT&T provides household and corporate internet services across United States, with some of the fastest speeds available. You can set up your AT&T router and connect to the internet in less than an hour. This article demonstrates how to properly log in to AT&T routers and alter the settings to guarantee that your security is not affected.
How To Login To An AT&T Router?
Waiting for the technician to arrive is one of the most inconvenient aspects of switching internet providers (or having internet installed for the first time). It’s far easier to set up the gadget yourself, it’s more convenient for your schedule, and it doesn’t require any technical knowledge. Follow these instructions to log in to your AT&T router:
1. Setup The Hardware After Opening The Box
Your router will be sent in a package that includes everything you’ll need to get started with your services at home. To install your gear, follow the instructions included in the package.
The AT&T router, also known as the gateway device, has coloured ports that match the included cords, making it easy to identify where the wires need to go. Connect the cables to the appropriate ports and plug the device in.
2. Activate The AT&T Router
It should take around 10 minutes to fully charge. You can proceed with the login process once the lights turn on and remain solid green.
3. Connect The AT&T Router To a Computer Or a Mobile Device
Use the default Wireless Network Name and Wireless Password stated on the black label on the side of your router to connect your wireless mobile device to the internet.
Open the Wi-Fi settings option in your device’s settings. In the list of accessible networks, look for the connection that matches the default Wireless Network Name listed on your router. Go to the link and click it.
Enter the default Wireless Password printed on the device when prompted for a password. To check for an internet connection, open an internet browser on the device.
Connect an Ethernet wire to the device’s matching connector on the rear. Then, on your computer, insert the other end into an ethernet port. Because this is a hardwired connection, there is no need to input a password to access the internet.
4. Launch a Browser
Open a web browser on your phone or computer, such as Safari, Internet Explorer, or Google Chrome.
5. Type In The Default IP Address For Your AT&T Router
In the address bar, type the router’s default IP address and hit Enter. The default IP address of the router is displayed on the router’s side. The default IP address for AT&T routers is either 192.168.1.254 or 192.168.1.1.
6. Enter The Default Username And Password For The AT&T Router
The main menu of the router will appear. AT&T routers don’t usually ask for passwords. On the product’s side, your item will most likely request you to input a default username and password when you log in to the device.
If you see a login prompt but can’t find a username/password combination on the side of your device, try the following combinations:
- Login Username: admin or (leave blank)
- Login Password: admin or (leave blank)
If you get a login prompt and your credentials don’t work, try resetting your device.
How To Reset AT&T Router?
Rebooting your device will usually resolve any technical issues. If you’ve already rebooted your device and are still experiencing issues, you should try a reset. This will clear your preferences and reset the product’s credentials to default.
Write down all of your settings, including your Wi-Fi username and password, as well as your device access code (if you have one).
To reset your device follow these steps:
Step 1: Turn off all of your router-connected devices.Locate your router’s “Reset” button. This button is positioned adjacent to the A/C power port on most AT&T models.
Step 2: Press the reset button with a small object like a ballpoint pen or the end of a paperclip. Insert the utensil’s end into the hole. When you press down on the button, you’ll hear a tiny click.
Step 3: Keep your finger on the reset button. Wait until all of the lights have gone out.After 15 seconds, release the reset button. The reset button must be held down for the entire 15 seconds. If you release pressure on the reset button before then, the procedure will halt and you will have to start over.
Step 4: Wait for the router to re-establish its connection. The reset process is complete when the lights come back on and turn solid green.Before the reset, re-configure your router to its previous settings.
How To Configure AT&T Router?
You should modify your settings after logging into your product to keep your device safe from prying eyes. Without your permission, someone might easily log in to your home or workplace networking tool using the default values. Before connecting other wireless devices to the internet, always change your router’s access code as well as your Wi-Fi network name and password.
You may alter your settings and utilise helpful features to test your speed and keep an eye on your services using either the Smart Home Manager or the router’s menu on an internet browser. In this part, we’ll go through how to configure your unit using both the Smart Home Manager and the AT&T router menu.
You may alter your access code, update your Wi-Fi network name and password, and run a speed test from the router’s main menu.
Configuring Under Router’s Main Menu
To change your access code, go to the “Device” menu and select “Access Code.” This box may appear, asking you to enter your current access code.
You’ll be taken to a page where you can modify your current access code after entering it. To save your modifications, fill out the blanks and click “Use New Access Cod.”
You can update your Wi-Fi network name and password under the Wi-Fi menu in the Home Network tab. You’ll find the “Home SSID” signal in the first area of the page; enable it and alter the Network Name and Password default settings. To confirm your new password, input it again.
Scroll down the page to the Guest SSID section once you’ve changed your Home SSID. Change the default username and password for your Guest SSID signal. To save your modifications to the Home and Guest SSID values, click “Save.”
From the main menu of your router, you can do a speed test. After that, go to the Diagnostics page and click on “Speed Test” is a phrase that is used to describe a Make a click on the “Click the “Run Speed Test” button and keep an eye on the Test History area for your findings.
Configuring Under Smart Home Manager
Log in to the Smart Home Manager and select the “More” tab to alter Wi-Fi settings. Make a click on “Network,” says the speaker.
The “Main Wi-Fi Network” section and the “Guest Wi-Fi Network” section are both found under “Network.” “the section To update the settings, click on each option (for the network name and password) separately. To edit the network names/passwords of your devices, use the arrows to the right to click on each option.
Change the name of your connection in the text box after clicking on the Wi-Fi network name “SSID” option under “Main Wi-Fi Network,” then click “Save” to confirm your changes. The back arrow will take you back to the previous screen.
Under “Main Wi-Fi Network,” change the “Wi-Fi Password.” Fill in the blanks and hit “Save.” Return to the “Network” menu by pressing the top-left arrow.
Click the “Tool” tab to do a speed test. Choose the “Speed Tes” option.On the following page, click the blue button “The “Run Speed Test” button is pressed. “Speed test history” is the section where your results will display.”
You have the option of installing your own equipment when you sign up for any internet subscription. The gadget comes with easy-to-follow visual installation instructions from AT&T. The setup process is designed to connect your router as soon as possible, so you can start surfing the web within an hour of receiving your box. The fast internet speeds and simple setup procedure
Conclusion
AT&T’s services are relatively accurate, according to FCC research, meaning that the speeds they claim are what you get. If you’re concerned that your router is slowing down, you may use the Smart Home Manager or the device’s main menu to do a speed test.